Artilume T1 owners
Your T1’s easy software
BurnBadger was built and tested on the Artilume T1. Plug in, pick your material, burn. No drivers to hunt for, no ports or baud rates, no tables to look up.
From the box to your first burn
- Download and install. Free for Windows 10/11 and macOS 14 or later.
- Plug in and connect. Switch the T1 on, connect its USB cable (or join a T1-P’s Wi-Fi) and click Connect laser.
- Focus and home. Set the 2 mm gap with the focus block, then click Home.
- Pick your material. Tested power and speed fill in for your 3, 7 or 12 W module.
- Frame, then burn. Start with the test card from Projects, or your own design.
Download the illustrated quick-start guide (PDF) · Video how-tos
Watch: connecting to your first burn
Settings that work on the T1
Tested on the T1: basswood cuts, slate, leatherette, anodized cards, kraft, denim and cork.
Ready-made projects
A test card, coasters, dice, a slot-together pyramid and a castle that presses together without glue.
Free to start
The core tools are free for good. Pro adds photos, cut lines and more, with a free trial.
Questions? support@burnbadger.com. More about BurnBadger on the Artilume T1. Artilume is a trademark of its owner; BurnBadger is independent software.